MANAGEMENT

Don Doty, Chief Executive Officer

Mr. Doty, co-founder of Doty Moore Tower Services LLC, is a pioneer in the broadcast tower industry. Elected Chairman of the National Association of Tower Erectors (NATE) in 2006, and on the board of Directors for the past 13 years.

In addition to positions as Chairman & Vice Chairman, Mr. Doty has also served 
as Chairman of the OSHA Relations Committee for 11 years, from which he stepped down to Committee member status to better serve the duties of NATE Chairman. Mr. Doty maintains positions on the Legislative Committee and the NATE/OSHA Partnership Management Team.

Mr. Doty is an active contributor to publications in the tower industry. His 
extensive writing credentials include contributing articles for the acclaimed Tower Times for the past 13 years, recently surpassing 160 articles in various capacities. Plus Mr. Doty has had numerous speaking engagements for National Safety 
Council (NSC), National Association of Broadcasters (NAB), the IEEE, several SBE affiliates and many individual groups.  In 2006 Mr. Doty was selected by Michigan Occupational Safety and Health Administration (MIOSHA) as a Consultant during the Negotiated Rulemaking efforts regarding tower safety regulations.

A recognized expert in safety, Mr. Doty is a regular speaker and advocate on various topics in the tower industry, from safety engineering to OSHA compliance issues, frequently visiting Washington, DC promoting safety initiatives.
Duane MacEntee, President and COO

Duane C. MacEntee is the President and Chief Operations Officer of Stainless LLC and has enjoyed over twenty years of serving in leadership and management roles within the telecommunications, transportation and aerospace industries.  

For most of his career, Duane has applied his operations, engineering, and legal experience to the infrastructure sector of those industries.

Prior to joining Stainless, Duane advised and consulted with corporate clients regarding business strategy, process improvement and organizational alignment. Duane was previously an executive officer at SpectraSite Communications, Inc. where he served as its Vice President of Field Operations and Corporate Administration and was responsible for revenue enhancement, cost optimization, regulatory compliance and risk management.  After SpectraSite’s merger with American Tower Corporation, he remained as ATC’s Vice President of 
Compliance & Corporate Counsel. 

Prior to SpectraSite, Duane was Director of Safety and Loss Control at the NC Department of Transportation, Commissioner at the NC Radiation Protection 
Commission and Commissioner at the NC State Emergency Response 
Commission.  Previous to his tenure in state government, Duane was an 
engineering manager and engineer at the Kennedy Space Center in Florida. 

Duane has a B.S. in Engineering Technology from the University of Central 
Florida, an Executive M.B.A. from the Florida Institute of Technology and a J.D. from North Carolina Central University.  Duane is also an active member of the American Bar Association and the North Carolina State Bar where he is 
admitted to the practice of law.
 
Pat Moore, 
Senior Vice President of Technical Services

Mr. Moore, co-founder of Doty Moore Tower Services LLC and leader in the broadcast tower industry. Mr. Moore was a charter member of NATE. He continues to work closely with various government agencies and industry associations to further the safety and knowledge of the industry. In his 25 years in the broadcast industry Mr. Moore has improved the safety and awareness in the industry while successfully completing the most difficult projects in the most treacherous conditions.

 

 
 

Tom Hoenninger, P.E.
Vice President of Engineering and Chief Engineer

Mr. Hoenninger is responsible for setting the design and quality standards for Stainless LLC and focuses on providing the safest and most economical communication broadcast towers customized to meet each client’s specific needs.

He has 30 years of experience in structural engineering specifically in the design
and fabrication of complex structures making him one of the most respected engineers in the tower industry. Mr. Hoenninger has been with Stainless for 
20 years. Previously he worked for FMC Corporation and Symons Corporation. He holds a BSCE and a MSCE in Structural Engineering from Drexel University. 

Mr. Hoenninger is a licensed professional engineer in 26 states and is an active member of the ASTM, ACI, ASCE, AISC, ASTM, ICC, NCEE, NSPE and 
TIA professional organizations. He participates in ASTM subcommittee A01.02 
and led the effort in having ASTM recognize round bar sizes for towers. He also participates in the TIA TR14.7 subcommittee that maintains “Structural Standards for Antenna Supporting Structures and Antennas” and is an active contributor to 
the 222 standard. Mr. Hoenninger performs peer reviews of submitted articles to 
be published in the AISC Engineering Journal. He also authors Section 7.2 of the NAB Engineering Handbook, “Tower Design, Erection and Maintenance.” 

Mr. Hoenninger is a frequent contributor in tower engineering publications.  He 
has presented insightful papers at industry events such as the NAB convention and PBS conferences.  A more detailed professional qualification can be found by clicking here.